Sunday, September 8, 2019

Retro W123 Mercedes Factory Window Sticker, Booklets


It's not often that one gets to purchase a car with most all of the original paper work, manuals, etc. I was grateful to have had the opportunity to acquire my 1981 Mercedes 240D from the original owners of 34 years who not only kept the car in near perfect condition, but included most all the original near perfect documentation from the factory.

Liking automotive history and the stories that go along with cars got me thinking that as younger generations begin to collect cars, many might not have access to some of the original factory pieces. In as much, many old enough to have known these cars from the beginning may have all but forgotten just how it was.

The following I compiled as both a historical perspective, and for some a journey down memory lane. You will see the original books (and page examples in the books) manuals,  inserts and factory invoice (window sticker), and the touch-up paint that came with my 1981 240D. From what I have been told, the only piece that is missing is the service log booklet.



Manufacturer invoice "window sticker"



This would also have been on the window adjacent to the above window sticker


Original envelope mailed June 16, 1981 to owners after purchase from Mercedes-Benz U.S.A. in New Jersey. The following 8 documents were in this envelope.  




Document 1 from envelope

Document 1 example of inside pages

Document 2 from envelope






























Document 2 example of inside pages






































Document 3 from envelope





































Document 4 from envelope



Backside of document 4 above

Document 5 from envelope

Document 5 example of inside pages


Document 6 from envelope

Document 7 from envelope
Document 8 from envelope
Owner's Manual and other glovebox documents that came with car at time of purchase
1981 240D, 300D, 300CD Mercedes-Benz owner's manual

1981 240D, 300D, 300CD Mercedes-Benz owner's manual inside pages
1981 Mercedes U.S.A. diesel fuel guide dealer location booklet
1981 Mercedes U.S.A. diesel fuel guide booklet inside pages

1981 Mercedes North America FM Stereo Radio usage booklet
1981 Mercedes North America FM Stereo Radio usage booklet inside pages
This 1981 Mercedes Consumer Information booklet is applicable to the 240D as well and was required by U.S.A. Federal law on stopping abilities etc. It appears Mercedes was able to use this with all W123 models as the information was applicable throughout the model range
This 1981 Mercedes Consumer Information booklet inside pages
Hang tag on cruise control stalk still complete with original string


Tire information card. This was found under the original spare tire from 1981


This sticker is located on the inside of trunk lid



















































Touch-up paint



This is a photo of the Norman Scott, Inc. Houston, TX dealership where my W123 was purchased. Image appears to be from the 70's. From this photo the dealer did not sell Mercedes-Benz at the time, and evidently did not sell Mercedes for very long. Research shows that Norman Scott, Inc. primarily sold Porsche and Audi for most of its existence along with several other dealerships that sold other marques. 





























Saturday, July 27, 2019

Easy Mandatory Maintenance on your W123

Keeping your Mercedes W123 diesel in great working order is quite easy, and if you follow the simple directions prescribed by Mercedes it will last you a life time.

The 240D and 300D series with the 4 cyl. and 5 cyl. respectively are nearly identical in their maintenance requirements. This article focuses specifically on the 240D.

Side Note: As I have mentioned several times in the past, there are so many blogs and forums that are littered with pages and pages of guessing on how to repair, check, and maintain these cars. Again, there is no guessing game involved, in fact there is really no need for this or any blog/forum if everyone would refer back to the manufacturers specifications. That said, I know it is helpful for those who are new to the classic car arena and wanting to get started on the right foot, or for those who started on the left foot and now wish to start doing it correctly.

Back to the topic at hand. As the cars age and some or many original components are still chugging along, I recommend that things be checked more frequently than prescribed as a matter of habit to avoid any unnecessary failures or destruction.

The following diagram although very rudimentary for some, is what I recommend at every oil change other than "L" which should be checked at every fill up. 

These items are not in order of importance and not all are items you will be changing at every oil change, rather these are things you should take a good look at for leaks, levels, color, smell and lubrication. Always follow the specific change intervals that Mercedes recommends! Again this is for a W123 diesel.

All change intervals are per Mercedes-Benz. I personally recommend using all Mercedes-Benz fluids and filters other than motor oil. Mercedes does not recommend using synthetics in older cars. I use BlueChem additives where appropriate. Würth grease is an excellent all purpose grease for door hinges, sun roofs, throttle linkage, etc.


A: Air Filter - Make sure filter is clean and replace at max. 10K miles or 1 year. If you live in a very dry climate the filter may need to be changed more frequently. B: Fuel Filter (secondary) - Make sure there are no leaks and change every 25K miles or 3 years. C: Fuel Filter (primary) - Make sure there are no leaks and change every 25K miles or 3 years, D: Ball Joint throttle linkage - check grease at every oil change and lubricate as needed. E: Fuel Injectors - Check for leaks. I recommend using one can of BlueChem diesel common rail injector cleaner to a full tank of fuel at every oil change. F: Fuel Injection hosing - check all fuel injection hosing and clamps for tightness and leaks. G: Vacuum Connections - check for cracks in rubber connections or brittle plastic colored lines. H: Break Fluid - Check level and change every year, I: Coolant - Change at intervals of 25K miles or no longer than 3 years making sure it is full to mark with a proper mixture for your climate. J: Power Steering Fluid -  Check hoses for leaks, make sure reservoir is to fill mark, check color to make sure it is not turning dark and replace at 50K miles. K: Transmission Fluid - change fluid and filter every 25K miles or 3 years and check when car has been driven at least 15 min., is in neutral (with someone in the car holding the brake) and checking the color to make sure it is not darkening.  L: Oil - check at every fuel fill up and do oil change every 3K miles or 6 months. I personally use Rotella and BlueChem Oil Treatment at each change along with an M-B filter. Not Pictured: Hoses - Check at every oil change for cracks or stiffening - Replace every 50K or 5 years. Belts check for cracking. Differential Fluid - Check at every oil change and replace at 25K miles or 3 years. 

Don't forget the other unseen parts that need attention as well: Fuel Tank Filter, to be checked every 50K miles unless you notice a loss of power or know you have tanked up with bad fuel. Thermostat - Change at 50K miles or 5 years. If you notice your temp gauge is creeping up higher than normal, change the thermostat. 

Perhaps some at this point in the read are rolling your eyes and muttering, "that's ridiculous, I'll know when it needs replacing, it'll leak on the driveway, start smoking, and won't have any power, and that's the time to take care of it!" Well, that certainly is an option, but not if you are serious about saving money, time, frustration and the car. Good thing about the W123 diesel, if you take care of it as directed, it will purr like a kitten and last a couple of generations with no problems.

By checking and maintaining these items at each oil change, you will be hard pressed to experience any roadside difficulties and you will have a car that most will be envious of.








Thursday, July 25, 2019

1975 Mercedes R107 Restoration Complete!

A long time coming, but it's finally finished. On June 15, 2016 a very neglected but 98% rust free 1975 Mercedes-Benz 450SL stood in my way and begged to be purchased. There was no way I could turn it down for the asking price of $500 and the rest is history.

I was told it had been sitting for at least 4 years at its present location and rumor had it that it sat an additional 5 years prior to that, but how bad could it be for $500. If nothing else I could part it out and recoup at least what I put into it. Well, that was 2016 and now it's 2019, and that pathetic SL is back in its glory days.

While the car has been nearly complete for about 6 months now, there are still a few minor pieces that are in the works to get it right. This process has been good for me as it has tried my patience on more than a few occasions, but that's what restoring something does for us!

The day I found it.

After it got home and I began the process of removing the crispy lambswool seat covers and copious amounts of trash.

The end result. The dash, steering wheel and console are original that I restored and recolored.



While the car was a mess, I noted that nothing of importance was missing or destroyed. My goal was to keep and restore as many original parts as possible and that ended up working out in the end. As you can see, the car originally came from the factory with a navy interior, which matched the 904 navy exterior along with a navy convertible top, yikes! For a car like this, that was entirely too much navy, at least for me, and 1970's or not, I still would not have bought into that monotone madness.  

So it was off to the Mercedes-Benz Classic Center in Irvine, California to find out what my color options would have been in 1975, and the news was good. Did I wan't to change the original exterior color? No. The interior was all that needed to set the monotony apart as I liked the MB 904 very dark blue, almost a blue/black. The interior color palette was not extensive but a lot better than what it was. My 1975 interior color options: black, blue, parchment, tobacco, red and bamboo. The winner: tobacco. 

Next was the top and carpet. From what I was told, the top color options that were directly available from the factory were black, blue, wheat and brown and the loop carpeting was available in palomino, cognac, charcoal, bamboo, black, blue, beige, red, brown and gray. The winner: Brown, which is a speckle of lighter and darker brown in the loop. The top was the last item to throw in the mix and it was a tough battle with everyone weighing in on what would look best. Blue was the major consensus and that just didn't seem to create the delineation needed to bring this alluring car to its prime. The winner: Brown

While the car doesn't appear too neglected in the photo the day I found it, it had been painted white, from the original blue, and the job was so bad I think it would be an insult to say Maaco did it. Regardless, the car was stripped to metal and properly painted.

The entirety of the 450SL went through a deep clean including the engine that was home to a family of Packrats among other critters. Thankfully they only chewed some of the vacuum hose, but no wiring thankfully.

The following are snapshots of the restoration through time.




The day I found the car and purchased it. The car was then taken to my home where we got it running and checked out the necessary items to make sure it was worthy of a restoration, and indeed it was. The rims on the car at this point were the knock off chrome Ronal rims that were pealing and badly pitted, and they went to a junkyard. Original 14in. Mercedes wheels were fitted. I found out from Mercedes the car original came with hubcaps.






























The car being taken from my home to the restoration shop fitted with proper Mercedes rims and the last of the production 14in Michelin tires.

At the shop getting stripped, Bondo'd and prepped for primer.




























Primed, masked and in the paint booth ready for paint.




























My paint guy mixing the original Mercedes blue.




























Laying down the color. Truly felt like this day would never come!




























Prepping the "show clear" coat.




























Laying down the clear. This guy is an exceptional painter and so fortunate to have had him do this car.




























Done! 

Even though it's done, there are still some things that need fine tuning. More will be posted on those items as they get worked on.


Saturday, January 19, 2019

Mercedes R107 Throttle Position Sensor - TPS

The throttle position sensor or TPS is a critical component to the cars overall performance. It must be in perfect working order to deliver proper fuel economy, power and smooth engine operation. 

As with any automotive component, the TPS can wear out or simply become dirty causing the engine to "buck" during exhilaration or cause a rough idle. The rough idle is generally more noticeable when the car is in gear, such as reverse or drive. 

Mercedes/Bosch no longer offer new throttle position sensors for the Bosch D-Jetronic  fuel injection system used in the early to mid 70's. 

If you are in need of a "new" unit, used units are available, but be sure you know they are working and have been checked if going that rout. Several ads on eBay suggested the unit was "working" when it was removed. For me, "working" does not tell me much. Mine is "working" but not as it should. Can I get the car down the road and onto the highway with my unit? Yes, but it's going to be a less than smooth, performance based trip.

In this article I will cover removing, checking, and cleaning the TPS from my 1975 Mercedes-Benz R107 which is not working properly. 

If you are going to engage in this, I would have a known working unit on hand incase yours breaks in the process of opening it up. Also, be forewarned, make sure if you are ordering one whether used or NOS, that you order and receive the correct TPS for your car. Bosch produced two unites for Mercedes, one for Federal cars and the other for California cars.

The throttle position sensor is located on the side of the throttle body and held on by a spring clip. 

STEP 1
Remove the 2 locking screws, then use a flathead screwdriver and gently pry off TPS at the shaft from the back. NOTE: It will make life much easier to remove the throttle body from the engine. Just don't drop the 4 bolts into the engine compartment. You will not get those back.


TPS connected to throttle body with cover removed. 


STEP 2
This is the step that can very easily break the cover so be very careful releasing the cover. Now examine the contacts. The throttle position sensor shown is from my 450SL and as you can see is no longer serviceable. The make-and-break contacts are worn through, causing a very erratic idle and throttle up between 0 mph and 40 mph. 


Hard to see in this photo, but some of the gold is worn through to the backing.

The red circles highlight where the gold is worn through causing the "short" in the circuit.



STEP 3
Based on the outcome of your investigation, the unit will either need to be replaced or cleaned. In this case it is no good.

STEP 4
To clean, take a cotton swab with electronic cleaner and gently wipe over the surface of the contact board. If debris remains, take a white vinyl eraser and GENTLY erase the dirt from the contact area of the board. There can be no marks between the contacts or there will be a potential for short-circuiting.

STEP 5
Calibrating unit.
I will do a subsequent article on how to test and adjust TPS. 






Friday, October 12, 2018

Mercedes W123 and R107 OEM Glass Shortage

Depending where you live, you are likely to need a windshield sooner or later. In the case of several Mercedes-Benz models, that can be a challenge or impossible. 

As of now, there is no OEM W123 windshield glass available from Mercedes. I spoke with the Mercedes-Benz Classic Center in California to acquire a new windshield, and was told it is out of stock and they don't know when it will be made available. They are hoping very soon as they are getting quite a few calls for it. In the meantime, you can get a new windshield from Pilkington Classic for about $220. While I very much respect Pilkington for their glass, it does not supplement the original glass from Mercedes.

When I purchased my 240D in 2015, I needed to get a new windshield and installed Pilkington glass as I was still not certain that I would keep the car long term. Now that I know I am keeping the car, and my three year old windshield is now damaged again from a landscape truck dropping gravel on the highway, I am wishing I could install OEM glass.

With regard to the R107 OEM windshield glass, it is still available at about $500 a copy, but the side door glass is no longer in production and very few new pieces are left.

As it stands, my R107 is at the Mercedes dealer this week being fitted with a genuine Mercedes windshield. Now we can only hope this will last for many years to come, and not succumb to a haphazardly covered load of debris taking flight on the highway.

If you are wanting OEM glass, please contact Mercedes-Benz USA or Europe and express your desire to have the original parts reproduced once again. 





Wednesday, October 3, 2018

Mercedes R107 — Points vs. Electronic Ignition

While I am perhaps overly indebted to authenticity, there comes a point when modification is just worth it. Prime example, points ignition vs. electronic ignition. 

Admittedly, I was very skeptical when I first installed electronic ignition in my 1965 Rolls-Royce Phantom V eight years ago. It has however been the best and only modification I have made to that car. I have now made this modification to the 1975 Mercedes 450SL and again, what a difference.

 The system I chose for the Mercedes 450SL was the Pertronix Ignitor electronic ignition (part 1885) in combination with the Pertronix Flame Thrower 1.5 ohm, 40,000 volt coil. The Flame Thrower coil is a must if you are going to make the modification. No, the coil does not look like the original OEM however, there are options to help that. More on that in an upcoming post. (For what it's worth, the Rolls-Royce received the Pertroinx Ignitor II system, which does not fit the 450SL. 

For the 1975 450SL, modifications will be needed on Pertronix Ignitor for it to fit properly in the distributor. The last I heard from Pertronix, was no plug and play version was going to be produced for this car as there was not enough demand as of yet.

The tachometer will also need to be reconfigured following the installation which is not complicated but once again it is not a simple plug and play as with many other cars that receive the system. More on how this is done in a future article.

Finally, you can decide either to leave the original Mercedes switch gear or eliminate it. I chose to eliminate it and remove the two resistors as recommended by Pertronix. If the resistors are kept inline, the Flame Thrower coil will not perform as designed, hindering the upgraded performance. Do however keep all your original components. Many collectors would like to have those quickly vanishing parts should you sell the car.

To keep the look of the car original, I have left the switch gear and the two Bosch resistors in place. 

Pros of the Pertronix ignition? A much improved idle and engine responsiveness, in addition to a slightly increased fuel economy. One particular note of interest was noticing that both the Rolls-Royce and the Mercedes delivered a different exhaust smell following the installation of the electronic ignition. It was quite evident to the olfactory that the combustion was more complete. 

Cons A little extra wiring will need to be done and a bit of modification to the Ignitor unit itself to seat properly in the distributor. 




Wednesday, August 8, 2018

Early 450SL/SLC Seat Adjustment Knob Removal

Should it be necessary to remove the seat back adjusting knob from an early Mercedes R107 350SL, 450SL/SLC will require a bit more than just a pull or pry. If you are not sure what style adjusting knob is on your car check first, as you will destroy an early version by trying to pry it off.

The following is helpful should you need to replace the plastic chrome trim on the seat hinges or disassemble the seats for restoration.



STEP 1
Insert a small screwdriver into the 4 slots around the knob center insert as shown. Do this gently to avoid cracking the cover.






































STEP 2
Using a hammer and screwdriver, gently tap the locking spring clip counter clockwise to the "unlock" position.





























STEP 3
Pull off rear portion of knob.





























STEP 4
The trim piece can now be removed. This would be the time to give the adjusting hinge mechanism a good cleaning.





























Reassembly is the reverse.